關於ce認證

① 關於CE認證

您這個做CE認證的話，必須要找歐盟的通告機構來做的，DAR只是德國國家認可機關中心，它專的授權跟歐盟通告機構沒什屬么關系。這樣說吧，歐盟對CE認證的要求是，出來很少一部分產品可以自我宣告說符合CE認證，別的大部分產品是要歐盟通告機構來審核簽發CE認證的，您說的那個有CNAS授權，CNAS是我國認證檢查委員會授權，跟CE認證沒多大關系。CE認證大致包括兩個部分：樣品檢測和通告機構審核測試報告。其中樣品檢測根據樣品不同，可能再國內具有17025資質的實驗室完成，但也有可能要拿到歐洲去檢測。測試報告的審核一定是由歐洲境內的通告機構自己完成的。CE認證的費用和周期要根據產品來確定的。
不知道我講清楚沒，您還有什麼問題可以聯系我，見我的資料。

您好！對於您這個問題，我個人覺得你以前那個CE認證是不是在歐盟通告機構做的，正規的CE證書上是不體現測試實驗室的，你以前那個CE證書是咱們國內CNAS實驗室給您簽發的嗎？國內機構或者實驗室簽發的CE認證在國外是沒有法律效應的，就相當於自己給自己出CE證書一樣。

② 關於CE認證

您好！我是從事CE認證工作的。
並不是所有產品出口歐洲都需要認證，基本上任何一個認證體系都有它適用的產品范圍。最簡單的比如中國的CCC認證，也只有少數產品被歸到強制性認證的范圍了。

看一個產品是否需要CE認證或是否在CE認證的強制性范圍內，首先要確定該產品歐洲的標准，即EN標准。比如，熱軋鋼材在歐洲有專用的標准EN 10025-1:2004 - Hot rolled procts of structural steels - Part 1: General technical delivery conditions ，我們在進行熱軋鋼材的CE認證時，就會先確認這個標准已經被歐盟各個會員國接納為協調標准，然後再找到其對應的歐盟指令-建築指令89/106/EEC Construction procts，這樣就確認了申請CE認證的所有依據。

CE認證范圍內的指令共有29個，涉及到很多產品，每個產品有其專用的EN標准。通常沒有專用標準的產品是找不到對應指令的，所以無法申請CE認證，也不在CE認證的強制性范圍內。比如您提到的銦棒，還不是大眾化的產品，歐盟並沒有針對此產品規范一個通用的EN標准，所以不需要申請CE認證。

再比如枸杞，是屬於農副產品的范圍，與對使用者或周邊的環境安全問題沒有影響，也不在CE認證的范圍。這些產品應該在食品安全的認證范圍內，主要檢查農葯殘留。

③ 請問如何查閱關於CE認證相關的英文資料，或者官方網站

CE Mark, or CE marking as it is officially named, is an obligatory proct mark for the European market, which indicates compliance 'certification' according to the requirements formulated in the approximately 22 European 'CE Marking Directives' and subsequent European standards. Therefore, the CE mark is important for manufacturers and importers placing procts in the European market.

ccus.com.cn offers information about CE marking, and to which specific procts it applies, as well as how the CE Mark can be obtained for a specific proct. Members can download templates and guidance documents, allowing them to prepare for or ('self') certify their procts for CE.

In this article a short introction is given about the main aspects of CE Marking. It is a good starting point for people who are not yet familiar with CE Marking and CE certification.

SUBJECTS:
- What is CE Marking?
- Why CE Marking?
- How do you benefit from the CE Marking?
- What are the requirements regarding affixing a CE Marking?

WHAT IS CE MARKING?
The CE Marking is a conformity marking consisting of the letters "CE". The CE Marking applies to procts regulated by certain European health, safety and environmental protection legislation. The CE Marking is obligatory for procts it applies to: the manufacturer affixes the marking in order to be allowed to sell his proct in the European market.
CE is an abbreviation for 'Conformité Européenne', French for 'European Conformity'. The CE Marking indicates that the proct it is affixed to conforms to all relevant essential requirements and other applicable provisions that have been imposed upon it by means of European directives, and that the proct has been subject to the appropriate conformity assessment procere(s). The essential requirements refer, among other things, to safety, public health and consumer protection.

Please note:
1.The CE Marking is not a quality-mark. First, it refers to the safety rather than to the quality of a proct. Second, CE Marking is mandatory for the proct it applies to, whereas most quality markings are voluntary.
2. Many people use the term "CE Mark". Initially, this was the phrase used to indicate this conformity marking. However, "CE Mark" was officially replaced by the term "CE Marking" in 1993. Thus, it is better to speak of "CE Marking".

WHY CE MARKING?
Since the Treaty of Rome was signed in 1946, the community of European states have continued to pursue the establishment of an internal market in Europe.
In this 'Single Market' a free movement of goods, persons, capital and services would have to be realized.
For a long time, the free movement of goods was frustrated by the fact that the national member states of the European Community were allowed to set national safety and health requirements for procts. In practice, the many different technical proct requirements and test proceres proved to cause trade barriers between the member states of the European Community, and thus were contrary to the goals of this organization.
Inspired by a series of rulings of the European Court of Justice, the European Commission and Council tried to break down the trade barriers by harmonizing the different national rules.

HOW DO YOU BENEFIT FROM THE CE MARKING?
The CE Marking is a kind of trade passport for the European marketplace: it allows the manufacturer to freely circulate their proct throughout the 18 countries of the European Economic Area (EEA).
There is only one set of requirements and proceres to comply with in designing and manufacturing a proct for the entire EEA. The various and conflicting national regulations are eliminated. As a result, the proct no longer needs to be adapted to the specific requirements of the different member states of the EEA.
In addition, it may be considered a benefit that by implementing the requirements, the proct will be safer for the user and this may also rece damage and liability claims.

WHAT IS REQUIRED REGARDING THE AFFIXING OF THE CE MARKING?
The CE Marking must be affixed to the proct, to its data plate or, where this is not possible or not warranted e to the nature of the proct,to its packaging,if any, and to theaccompanying documents by the manufacturer, the authorized representative in the European Community or, in exceptional cases, by those responsible for placing the proct on the market.

④ 關於CE認證模式

歐盟法規沒有明確規定2張證書必須是一家機構出具的，但是你需要向另一家機構咨詢，問他們是否接受其他機構的B模式證書？每個機構的規定是不同的。
一般情況下，如果B模式證書是權威機構出具的，那麼其他機構都是接受的；如果B模式證書是一般機構出具的，那麼有的機構接受該證書，有的機構不接受該證書。

⑤ 關於歐盟CE認證的內容有哪些

「CE」標志是一抄種安全認證標志，被視為製造商打開並進入歐洲市場的護照。CE代表歐洲統一（CONFORMITE EUROPEENNE）。凡是貼有「CE」標志的產品就可在歐盟各成員國內銷售，無須符合每個成員國的要求，從而實現了商品在歐盟成員國范圍內的自由流通。
CE認證涉及出口的大多數產品，面對不同產品，CE認證的條款與內容也是不同的，常見指令如下：
LVD, 2006/95/EC, 低電壓安全指令；
EMC, 2004/108/EC, 電磁兼容指令；
MD, 2004/62/EC, 機械指令；
PPE, 89/686/EEC, 個人防護用品指令；
GPSD, 2001/95/EC，一般產品安全指令；
......等等

⑥ 關於CE認證和RoHS認證

CE和RoHS是歐洲的,中國也有RoHS
建議朋友們找NPS申請個RoHS認證同時符合CE認證

⑦ 關於歐盟CE認證的有關問題

沒有免費服務你自我申明的。。。。。
做個第三方認證也沒多少錢，如果你做第三方認證，公告機構的CE，
我倒是很樂意效勞了。。。

⑧ CE認證過程中，關於銘牌的要求

銘牌上要有製造商的名稱，地址，產品的名稱，型號，要有製造年份，設版備的重量，主要技術參權數和CE標識。CE標識的高度不低於5mm。對尺寸大小沒有嚴格要求，適合你的設備就可以了。

經常出口的商家會知道，電子電器類產品出口歐盟，需要做CE認證。

不同的產品，申請CE認證會有不同的要求。對於一般的數碼產品的CE認證，簡單的提供產品名稱、型號、簡單的輸入輸出參數即可完成CE認證。而對於機械CE認證要求的資料就多了，需要多提供關鍵零部件清單和CE銘牌。

(8)關於ce認證擴展閱讀：

首先，CE認證是歐盟國家的認證，所以銘牌上必須是有英文信息的，不能是全中文信息。

其次，機械CE認證標準的銘牌應該包括以下幾個方面：

1、產品名稱

2、主測型號

3、總功率

4、輸出參數：電壓、電流、相位

5、產品尺寸、重量

6、製造商信息

7、符合矢量要求的CE標簽

⑨ CE認證過程中，關於銘牌的要求

大小沒要求，只是CE這個符號標識高低不低於5mm，電子帶電產品CE認證我們可以出報告證書。CNAS授權實驗室。

⑩ 關於海關ce認證的問題

CE認證費用主要取決於選擇的認證機構和產品的相關指令。不同的產品測試項目也截然不同專，一般常見產品為電子電屬器類產品，常見測試項目分類EMC與LVD指令。而機械產品CE認證費用遠遠高於普通產品，其涉及到審廠程序與評估。