关于ce认证

① 关于CE认证

您这个做CE认证的话，必须要找欧盟的通告机构来做的，DAR只是德国国家认可机关中心，它专的授权跟欧盟通告机构没什属么关系。这样说吧，欧盟对CE认证的要求是，出来很少一部分产品可以自我宣告说符合CE认证，别的大部分产品是要欧盟通告机构来审核签发CE认证的，您说的那个有CNAS授权，CNAS是我国认证检查委员会授权，跟CE认证没多大关系。CE认证大致包括两个部分：样品检测和通告机构审核测试报告。其中样品检测根据样品不同，可能再国内具有17025资质的实验室完成，但也有可能要拿到欧洲去检测。测试报告的审核一定是由欧洲境内的通告机构自己完成的。CE认证的费用和周期要根据产品来确定的。
不知道我讲清楚没，您还有什么问题可以联系我，见我的资料。

您好！对于您这个问题，我个人觉得你以前那个CE认证是不是在欧盟通告机构做的，正规的CE证书上是不体现测试实验室的，你以前那个CE证书是咱们国内CNAS实验室给您签发的吗？国内机构或者实验室签发的CE认证在国外是没有法律效应的，就相当于自己给自己出CE证书一样。

② 关于CE认证

您好！我是从事CE认证工作的。
并不是所有产品出口欧洲都需要认证，基本上任何一个认证体系都有它适用的产品范围。最简单的比如中国的CCC认证，也只有少数产品被归到强制性认证的范围了。

看一个产品是否需要CE认证或是否在CE认证的强制性范围内，首先要确定该产品欧洲的标准，即EN标准。比如，热轧钢材在欧洲有专用的标准EN 10025-1:2004 - Hot rolled procts of structural steels - Part 1: General technical delivery conditions ，我们在进行热轧钢材的CE认证时，就会先确认这个标准已经被欧盟各个会员国接纳为协调标准，然后再找到其对应的欧盟指令-建筑指令89/106/EEC Construction procts，这样就确认了申请CE认证的所有依据。

CE认证范围内的指令共有29个，涉及到很多产品，每个产品有其专用的EN标准。通常没有专用标准的产品是找不到对应指令的，所以无法申请CE认证，也不在CE认证的强制性范围内。比如您提到的铟棒，还不是大众化的产品，欧盟并没有针对此产品规范一个通用的EN标准，所以不需要申请CE认证。

再比如枸杞，是属于农副产品的范围，与对使用者或周边的环境安全问题没有影响，也不在CE认证的范围。这些产品应该在食品安全的认证范围内，主要检查农药残留。

③ 请问如何查阅关于CE认证相关的英文资料，或者官方网站

CE Mark, or CE marking as it is officially named, is an obligatory proct mark for the European market, which indicates compliance 'certification' according to the requirements formulated in the approximately 22 European 'CE Marking Directives' and subsequent European standards. Therefore, the CE mark is important for manufacturers and importers placing procts in the European market.

ccus.com.cn offers information about CE marking, and to which specific procts it applies, as well as how the CE Mark can be obtained for a specific proct. Members can download templates and guidance documents, allowing them to prepare for or ('self') certify their procts for CE.

In this article a short introction is given about the main aspects of CE Marking. It is a good starting point for people who are not yet familiar with CE Marking and CE certification.

SUBJECTS:
- What is CE Marking?
- Why CE Marking?
- How do you benefit from the CE Marking?
- What are the requirements regarding affixing a CE Marking?

WHAT IS CE MARKING?
The CE Marking is a conformity marking consisting of the letters "CE". The CE Marking applies to procts regulated by certain European health, safety and environmental protection legislation. The CE Marking is obligatory for procts it applies to: the manufacturer affixes the marking in order to be allowed to sell his proct in the European market.
CE is an abbreviation for 'Conformité Européenne', French for 'European Conformity'. The CE Marking indicates that the proct it is affixed to conforms to all relevant essential requirements and other applicable provisions that have been imposed upon it by means of European directives, and that the proct has been subject to the appropriate conformity assessment procere(s). The essential requirements refer, among other things, to safety, public health and consumer protection.

Please note:
1.The CE Marking is not a quality-mark. First, it refers to the safety rather than to the quality of a proct. Second, CE Marking is mandatory for the proct it applies to, whereas most quality markings are voluntary.
2. Many people use the term "CE Mark". Initially, this was the phrase used to indicate this conformity marking. However, "CE Mark" was officially replaced by the term "CE Marking" in 1993. Thus, it is better to speak of "CE Marking".

WHY CE MARKING?
Since the Treaty of Rome was signed in 1946, the community of European states have continued to pursue the establishment of an internal market in Europe.
In this 'Single Market' a free movement of goods, persons, capital and services would have to be realized.
For a long time, the free movement of goods was frustrated by the fact that the national member states of the European Community were allowed to set national safety and health requirements for procts. In practice, the many different technical proct requirements and test proceres proved to cause trade barriers between the member states of the European Community, and thus were contrary to the goals of this organization.
Inspired by a series of rulings of the European Court of Justice, the European Commission and Council tried to break down the trade barriers by harmonizing the different national rules.

HOW DO YOU BENEFIT FROM THE CE MARKING?
The CE Marking is a kind of trade passport for the European marketplace: it allows the manufacturer to freely circulate their proct throughout the 18 countries of the European Economic Area (EEA).
There is only one set of requirements and proceres to comply with in designing and manufacturing a proct for the entire EEA. The various and conflicting national regulations are eliminated. As a result, the proct no longer needs to be adapted to the specific requirements of the different member states of the EEA.
In addition, it may be considered a benefit that by implementing the requirements, the proct will be safer for the user and this may also rece damage and liability claims.

WHAT IS REQUIRED REGARDING THE AFFIXING OF THE CE MARKING?
The CE Marking must be affixed to the proct, to its data plate or, where this is not possible or not warranted e to the nature of the proct,to its packaging,if any, and to theaccompanying documents by the manufacturer, the authorized representative in the European Community or, in exceptional cases, by those responsible for placing the proct on the market.

④ 关于CE认证模式

欧盟法规没有明确规定2张证书必须是一家机构出具的，但是你需要向另一家机构咨询，问他们是否接受其他机构的B模式证书？每个机构的规定是不同的。
一般情况下，如果B模式证书是权威机构出具的，那么其他机构都是接受的；如果B模式证书是一般机构出具的，那么有的机构接受该证书，有的机构不接受该证书。

⑤ 关于欧盟CE认证的内容有哪些

“CE”标志是一抄种安全认证标志，被视为制造商打开并进入欧洲市场的护照。CE代表欧洲统一（CONFORMITE EUROPEENNE）。凡是贴有“CE”标志的产品就可在欧盟各成员国内销售，无须符合每个成员国的要求，从而实现了商品在欧盟成员国范围内的自由流通。
CE认证涉及出口的大多数产品，面对不同产品，CE认证的条款与内容也是不同的，常见指令如下：
LVD, 2006/95/EC, 低电压安全指令；
EMC, 2004/108/EC, 电磁兼容指令；
MD, 2004/62/EC, 机械指令；
PPE, 89/686/EEC, 个人防护用品指令；
GPSD, 2001/95/EC，一般产品安全指令；
......等等

⑥ 关于CE认证和RoHS认证

CE和RoHS是欧洲的,中国也有RoHS
建议朋友们找NPS申请个RoHS认证同时符合CE认证

⑦ 关于欧盟CE认证的有关问题

没有免费服务你自我申明的。。。。。
做个第三方认证也没多少钱，如果你做第三方认证，公告机构的CE，
我倒是很乐意效劳了。。。

⑧ CE认证过程中，关于铭牌的要求

铭牌上要有制造商的名称，地址，产品的名称，型号，要有制造年份，设版备的重量，主要技术参权数和CE标识。CE标识的高度不低于5mm。对尺寸大小没有严格要求，适合你的设备就可以了。

经常出口的商家会知道，电子电器类产品出口欧盟，需要做CE认证。

不同的产品，申请CE认证会有不同的要求。对于一般的数码产品的CE认证，简单的提供产品名称、型号、简单的输入输出参数即可完成CE认证。而对于机械CE认证要求的资料就多了，需要多提供关键零部件清单和CE铭牌。

(8)关于ce认证扩展阅读：

首先，CE认证是欧盟国家的认证，所以铭牌上必须是有英文信息的，不能是全中文信息。

其次，机械CE认证标准的铭牌应该包括以下几个方面：

1、产品名称

2、主测型号

3、总功率

4、输出参数：电压、电流、相位

5、产品尺寸、重量

6、制造商信息

7、符合矢量要求的CE标签

⑨ CE认证过程中，关于铭牌的要求

大小没要求，只是CE这个符号标识高低不低于5mm，电子带电产品CE认证我们可以出报告证书。CNAS授权实验室。

⑩ 关于海关ce认证的问题

CE认证费用主要取决于选择的认证机构和产品的相关指令。不同的产品测试项目也截然不同专，一般常见产品为电子电属器类产品，常见测试项目分类EMC与LVD指令。而机械产品CE认证费用远远高于普通产品，其涉及到审厂程序与评估。